wear-resistance
推荐文章
释义
抗磨力；
权威例句
Wear resistanceWear resistance
Wear resistance
Stencils having enhanced wear-resistance and methods of manufacturing the same
Fretting wear-resistance of Ni-base electro-brush plating coating reinforced by nano-alumina grains
Structure and wear-resistance of an Fe-VC surface composite produced in situ
Improved sliding wear-resistance of alumina with sub-micron grain size: A comparison with coarser grained material
STRUCTURE AND WEAR-RESISTANCE OF Fe-VC SURFACE COMPOSITE PRODUCED BY LIQUID REACTIONS
Theoretical investigation of wear-resistance mechanism of superelastic shape memory alloy NiTi
Diamond sintered body having high strength and high wear-resistance and manufacturing method thereof
Unoxidized graphene/alumina nanocomposite: fracture- and wear-resistance effects of graphene on alumina matrix.
Elements inter-diffusion in the turning of wear-resistance aluminum bronze
Wear-resistance of Electroless Ni-P-Diamond Composite Coating
1. Performance characteristics: a good non-stick performance and wear-resistance, easy to clean.
性能特色：良好的不粘性能和耐磨性能，容易清洁。
youdao
2. They hoped the waiting and the uncertainty would wear down my resistance.
他们希望这种等待和不确定性会削弱我的抵抗。
《柯林斯英汉双解大词典》
3. With graphite particle content increasing from 5% to 20%, wear weight-loss and friction coefficient of the composites are obviously declined, greatly improving wear resistance of the composites.
随着石墨颗粒含量从5%增加到20%，镁合金基复合材料的耐磨性得到明显的改善，磨损质量损失与摩擦系数都降低到较低水平。
youdao
4. Aluminum Oxide Specific gravity 2.4 Moh hardness 3. More a filler than an abrasive. Tends to fade, but has good wear resistance. Will polish the opposing surface.
氢氧化铝比重2.4莫氏硬度3。比磨料加得更多的填充物。有衰退趋势，但耐磨性好。将抛光对偶。
youdao
5. Low carbon steels are well suited for the following applications: tool bodies, handles, die shoes, and similar situations where strength and wear resistance are not required.
低碳钢适用于以下情况：工具机身，把手，模座及其它不要求强度和耐磨性的类似情况。
youdao
6. Engineering ceramic materials are difficult to machine because of their outstanding properties, such as high hardness, high wear resistance, high erosion resistance and high brittleness.
工程陶瓷因为具有极高的硬度、良好的耐磨耐蚀性和很高的脆性，使其成为难加工材料。
youdao
7. They have moderate wear resistance to impact and it is a good carbide grade for universal applications. They.
耐磨性和抗冲击性能适中，通用性较好，用于精轧机组后部大部分机架或全部机架的线材轧制。
youdao
8. So screw, nut design is based on wear resistance.
因此螺杆、螺母的设计依据是耐磨性。
youdao
9. High carbon steels are the most hardenable type of carbon steel and are used frequently for parts where wear resistance is an important factor.
高碳钢是最能被硬化的一种碳钢，常常用于高耐磨性很重要的地方。
youdao
10. Pump cover material with steel ZG230-450 more, can also be used ductile iron, the latter two materials contrast of wear resistance and hardness and heat resistance to be because the former.
泵体、泵盖的材质采用铸钢ZG230-450的较多，也可以采用球墨铸铁材质，两种材质对比后者的耐磨性和硬度以及耐温性要因为前者。
youdao
11. For carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
youdao
12. For carbide, glass, ceramics, stone, precious stones and other heavy-load cutting, grinding wear resistance.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
youdao
13. Sputtering is now widely applied on cutting tools, forming tools, injection molding tools, and common tools such as punches and dies, to increase wear resistance and service life.
现在反应溅射法已被广泛应用于切削刀具、成型工具、注射模具和诸如冲头和冲模之类的通用器具，以增强其耐磨性和使用寿命。
youdao
14. The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。
youdao
15. Steel tooth bit can increase the bit's stability and lower the tooth impact load, and enhance its wear resistance.
钢齿牙轮钻头增强了工作的平稳性，降低了牙齿的冲击载荷，使牙轮钻头的耐磨性能得到提高；
youdao
16. Said really high environmental protection water soluble paint, but its wear resistance, anti pollution performance of relatively weak.
表示，水溶性漆的环保性确实很高，但其耐磨性、抗污性能相对较弱。
youdao
17. However, in some application conditions, low hardness, big friction coefficient and poor wear resistance confine its extensive application in engineering.
然而，在某些应用条件下，钛合金的硬度低，摩擦系数大，耐磨性差。
youdao
18. Because of the special alloy coatings has the properties and the application at the special requirements, can be divided into the wear resistance, solderability, magnetic and bearing alloy etc.
由于合金镀层具有的特殊性能及使用上的特殊要求，可分为耐磨性、可焊性、磁性及轴承合金等。
youdao
19. Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
youdao
20. The effects of the size, distribution and content of graphite particle upon mechanical properties and wear resistance are studied.
研究了石墨粒子的大小、分布、含量对机械性能及耐磨性的影响。
youdao
21. PCD material is characterized by high hardness, wear resistance and high cost.
PCD材料具有高硬度、高耐磨性以及刀具刃磨成本较高等特点。
youdao
22. Tungsten can improve the hardness and thermal strength of steel, and can improve the wear resistance of steel.
钨能进步钢的红硬性和热强性，并能进步钢的耐磨性。
youdao
23. The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
youdao
24. Description: High Hardness, Good wear Resistance, Good Toughness, Even wearing, No Breakage.
产品描述：硬度高，磨耗低，韧性好，不失圆，破碎少。
youdao
25. Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
youdao
26. Interchangeable wear resistance linings, Reversible mixing blades, Water distribution ring with spray nozzles, Inspection covers for easy cleaning and maintenance.
可通用的耐磨衬板，可翻转的搅拌叶片。注水喷嘴分布在环形水管上，检查孔方便检查和维修。
youdao
27. For concrete ground, it can save the cement consumption, and no purifying is needed, which increases the strength and wear resistance.
硬化混凝土地坪中，节约水泥用量，施工中不提浆，增加强度和耐磨耐久性作用。
youdao
28. Good characteristics for toughness and wear resistance.
具有好的耐磨损和韧性。
youdao
29. High temperature corrosion resistance, wear resistance, scouring resistance, oxidation resistance.
高温耐腐蚀、耐磨损、耐冲刷、抗氧化。
youdao
30. High temperature corrosion resistance, wear resistance, scouring resistance, oxidation resistance.
高温耐腐蚀、耐磨损、耐冲刷、抗氧化。
youdao
wear-resistance
