bottom flange
释义
底缘；
双语例句
Small rectangular backup bars were used to fabricate the web-bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板。
权威例句
Bottom Flange Confinement Reinforcement in Precast Prestressed Concrete Bridge GirdersSelf-centering MRFs with bottom flange friction devices under earthquake loading
Post-tensioned self-centering moment connections with beam bottom flange energy dissipators
Ski with profiled upper side - has top and bottom flange, with core enclosed by side plates, and intermediate layer
Post-tensioned moment connections with a bottom flange friction device for seismic resistant self-centering steel MRFs
Cracking Mechanism and Simplified Design Method for Bottom Flange in Prestressed Concrete Box Girder Bridge
Seismic resistant self-centering steel moment resisting frames with bottom flange friction devices
Optimization of welding joint between tower and bottom flange based on residual stress considerations in a wind turbine
Experimental Study of a Self-Centering Beam – Column Connection with Bottom Flange Friction Device
Numerical simulation of the seismic behavior of self-centering steel beam-column connections with bottom flange friction devices
1. When cleaning, unscrew the head bottom plug, drain fluid, remove the flange cover, remove the filter basket, cleaning and re load can, therefore, maintenance is extremely easy to use.
当需要清洗时，旋开主管底部螺塞，排净流体，拆卸法兰盖，取出滤篮，清洗后重新装入即可，因此，使用维护极为方便。
youdao
2. Bottom mount, Fix Closeing, With flange.
底部安装，固定关闭，带轮缘。
youdao
3. Reattach the relief valve hose to the elbow in the bottom flange cover.
重新将安全阀软管接到底部法兰盖内的弯头上。
youdao
4. The 7612-06 features a strap hanger, no flange, and bottom connect. It has a 2" dial diameter and 48" capillary length.
主要特点是一个绳子支架，无边缘，和底部联接。刻度表盘的直径是2“和管子的长度是48”
youdao
5. The bottom of each air-water cooker is provided with a water inlet and a water outlet flange.
所述每个空水冷却器的底部装置进出水法兰。
youdao
6. Our separators are designed with retainer clips that are pre-positioned and welded to the flange and bottom plate to ensure metal to metal contact throughout the separator package.
我们分离的设计与剪辑聘有预先部署和焊接的法兰盘和底板，以确保金属接触整个分离器包。
youdao
7. Analysis shows that it is the best way to improve the stress distribution of the twin-box single cross section of cable-stayed bridge by thickening the bottom flange.
分析表明：加厚底板对斜拉桥双箱单室箱形主梁应力分布的改善效果最佳。
youdao
8. Analysis could also show, to improve the stress distribution of the twin-box single cross section of cable-stayed bridge, it is the best way by thickening the bottom flange.
分析还表明，加厚底板对斜拉桥双箱单室箱形主梁应力分布的改善效果最佳。
youdao
9. The bottom plating is a principal longitudinal member providing the lower flange of hull girder.
船底板构成船体梁的下翼缘板，是主要的纵向构件。
youdao
10. The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.
减速机以底面法兰侧面的四条刻线对准台板划线进行找正。
youdao
11. Bulk freight wagons with pressure discharge; pressure gauge with plate spring, radial bottom flange connection.
带压力卸料装置的散装料运货车。带板簧的压力计。径向。
youdao
12. The results show that the areas of the bottom corners of the flange and arc gears are difficult for forming, and the cold forging process fits for these parts.
研究表明：法兰下端面和弧形齿下端角隅处是最难充填区域，该类零件的成形宜用冷锻成形工艺。
youdao
13. Remove the bottom flange cover.
拆卸底部法兰盖。
youdao
14. Stress concentration in the top and bottom flange at anchorage zones was observed.
箱梁顶底板在锚固区有应力集中现象；
youdao
15. Tank mounted - flange mounts onto the bottom tank dish to become an integral part of the vessel.
储气罐安装-底部容器烹调的法兰安装到该船只成为一个不可分割的一部分。
youdao
16. The at least one web extends vertically from at least one of the top and bottom of the header pipe and is connected to the flange.
至少一个腹板从集管管道的顶部和底部中至少一个竖直延伸并连接到凸缘上。
youdao
17. Aimed at the severe damage of the gasifier taper-bottom flange in Zhenhai fertilizer plant, a repair method is presented in this article. It is proved by the application that the method is practical.
针对镇海炼化公司化肥厂渣油气化炉锥底法兰严重烧损的现状，提出锥底法兰的更换方案，实践证明有效地满足使用要求。
youdao
18. The main part is 4 column pressure. Used for pre-deforming before welding large electric pole's bottom flange to ensure flatness after welding.
本设备主体部分为四柱液压机，主要用于大型电力杆的底法兰在焊接前的预弯变形，以确保底法兰与杆体焊接后端面保持水平。
youdao
19. Used for welding the pole edge with the bottom flange for the telecom pole, street light pole.
该设备专用于通讯杆、高杆灯杆体端部与发兰盘自动环焊对接的焊机设备。
youdao
20. Weld on the 30 "bottom flange."
用气焊割掉30“隔水管。”
youdao
21. Weld on the 30 "bottom flange."
用气焊割掉30“隔水管。”
youdao
bottom flange
