bending strength
释义
抗挠强度，抗弯强度；
双语例句
In the present paper the density of bodies beforeand after sintering as well as flexural strength were measured.
相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量。
Strength properties are commonly referred to as tensile strength, bending strength, compressive strength, torsional strength, shear strength and fatigue strength.
强度性能一般涉及到抗张强度，弯曲强度，耐压强度，抗扭强度，切变强度和疲劳强度。
The effect of powder pre-alloying on the hardness and bending strength of diamond tools matrix was studied.
本文通过试验分析研究了铁基粉末预合金化对金刚石工具胎体硬度与抗弯强度的影响。
The material mechanical properties, such as flexural strength, are measured by three point bending techniques.
利用三点弯曲方法测定了材料的抗弯强度等力学性能。
The flexural strength was determined by using the 4-point bending technique.
本研究以四点弯曲的方式量测挠曲强度。
The stroke of cylinder bearing with compressing loading is controlled by buckling strength.
承受压缩负载的油缸的行程通过压曲强度来控制。
权威例句
bending strengthBending Strength
Bending Strength of Steel Beams with Corrugated Webs
Bending strength and toughness of heat-treated wood.
What determines the bending strength of compact bone?
Measurement of the bending strength of vapor-liquid-solid grown silicon nanowires.
Increasing bending strength and pullout strength in conical pedicle screws: biomechanical tests and finite element analyses.
Calculating Method for Bending Strength of Concrete Bending Member Strengthened with CFRP Considering the Secondary Load
Mechanical validation of a tomographic (pQCT) index for noninvasive estimation of rat femur bending strength.
Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and...
1. Superhuman mental powers, including his extraordinary sense of hearing and blazing speed-reading, are as vital to Superman as his bullet-beating velocity and steel-bending strength.
超人的精神超能力，包括他拥有的听觉超能力和阅读超能力，就像他拥有的可以躲避子弹的速度和折断钢铁的力量一样至关重要。
youdao
2. Stiffness: It is a measure of the bending strength of paper and board.
挺度：挺度是衡量纸和纸板耐弯曲的强度性能。
youdao
3. Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。
youdao
4. The law shows that, along with the static pre-load increasing, the dynamical bending strength of concrete would go up to a peak value and then move downward to the static strength.
计算结果显示，不同细观骨料模型具有相似的规律，即随预静载增大，混凝土动弯拉强度上升，至一定峰值后回归到静载强度。
youdao
5. Bending strength, compressive strength, interfacial bond strength and frost-resistance were also studied and analyzed.
并对其抗压、抗折、新老界面粘结强度及抗冻性等进行了实验研究。
youdao
6. It is found that the bending strength of gauge glass increases when the temperature decreases.
随着温度降低，玻璃板的抗弯强度测定值增加。
youdao
7. The study results in the paper can be conclude that the bending strength and fatigue life of RPC with steel fibre are much higher than those of plain RPC.
本文研究结果可归纳为：与无纤维RPC相比，钢纤维的加入大大增加了活性粉末混凝土的抗折强度和疲劳寿命。
youdao
8. Bending strength and fracture toughness of the composite were studied, and the microstructure of the composite was researched by TEM techniques.
对复合材料的强度及韧性进行了研究，采用TEM技术对材料的微观结构进行了分析。
youdao
9. Bending strength is the main mechanical performance index for cemented chipboard.
抗弯强度是水泥刨花板的主要力学性能指标。
youdao
10. Bending strength significantly increased after 200 and 400 hours of aging only.
弯曲强度显著增加200和400小时的老化只。
youdao
11. The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
youdao
12. The influences of different synthetic graphite, pressure applying moment and cooling-down methods on electrical conductivity and bending strength of the composites were investigated.
研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响。
youdao
13. This paper delivered the relationships of uniaxial tensile and compressive stress with strain and bending properties, and felt-bending strength of cement mortar with polyvinyl acetate (PVAC).
研究掺聚醋酸乙烯水泥砂浆的轴拉和轴压应力—应变关系、抗弯性能以及长期粘结抗弯强度。
youdao
14. The results of mechanical test show that is bending strength, toughness against impact and void ratios can be improved after the rich iron matris is added with rare earth.
力学性能测试结果表明：添加稀土的富铁胎体及其金刚石复合材料的抗弯强度、冲击韧性和孔隙度均有明显的改善。
youdao
15. Additionally, the fracture surfaces of bending strength specimen were also explained.
此外，还对抗弯强度试样的断口进行了分析。
youdao
16. The result shows that, for a definite hybrid composite, the bending strength increases as the numbers of the plies drop-off at a station reduce.
结果表明：对于一定的混杂复合材料，弯曲强度随着某一位置层错数目的减少而增加；
youdao
17. Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.
应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。
youdao
18. The results show that the dry density, bending strength and compressive strength of foam concrete block decreased with the increasing of the amount of foam.
研究结果表明：泡沫加入量增加，泡沫混凝土砌块的干密度逐步减小，抗折和抗压强度递减。
youdao
19. The results show that porosity is a linear function of graphite content and that bending strength is an exponential function of porosity.
结果表明：孔隙度与石墨含量呈线性关系，抗弯强度与孔隙度呈指数关系。
youdao
20. The mechanism of bending strength increased by bauxite chalmette and the process were investigated by XRD and SEM.
利用XRD、SEM等测试手段，对熟铝矾土提高瓷坯抗弯强度的机理和生产工艺进行了研究。
youdao
21. With site deterioration the wood crushing and bending strength is increased.
随着立地的贫瘠化，木材抗压、抗弯强度增大；
youdao
22. The measuring technique of tensile strength of ceramics is usually sophisticated, but it is easy for us to measure the bending strength of ceramics.
陶瓷材料抗拉强度的测试技术一直是个难以解决的问题，而抗弯强度的测定则已经较成熟且简便。
youdao
23. The hardness, the fracture toughness and the bending strength of the composites were tested.
对热压烧结后材料的硬度、断裂韧性和抗弯强度进行了测试和分析；
youdao
24. The results show that steel fiber reinforced ferroconcrete t beam possesses high bending strength and excellent crack resistance property.
结果表明，钢纤维增强钢丝网混凝土T形梁具有较高的正截面抗弯强度和良好的抗裂性能。
youdao
25. Conclusion: the values of fatigue strength and bending strength of the bone cement were improved by vacuum mixing. The method of vacuum mixing has an active significance in clinic.
结论：采用真空搅拌骨水泥的方法，提高了国产骨水泥的抗疲劳强度及静态抗弯曲强度，在临床应用有较大的积极意义。
youdao
26. As compared to general coating, gradient coating has even more excellent performances in bending strength, bonding strength, thermal shock resistance, microhardness and thermal stress relaxation.
与一般涂层相比，梯度涂层显示出更为优异的弯曲强度、结合强度、抗热冲击性、显微硬度分布及缓和热应力等性能。
youdao
27. The stress shielding rate, bending strength of different directions and torsion strength of the three different fixation methods were measured and compared.
然后对三种固定方法对固定骨段的应力遮挡率、不同加载方向的弯曲强度和扭转强度进行测试。
youdao
28. Bending strength is a critical index for inspection and evaluation of cement concrete facing.
水泥砼面层以抗折强度作为强度检验和评定的首要指标。
youdao
29. Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
youdao
30. The dry density, bending strength and compressive strength of foam concrete block increased with the increasing of the amount of fly ash.
粉煤灰加入量增加，泡沫混凝土砌块的干密度递增，抗折和抗压强度增大。
youdao
bending strength
