angle blade
释义
单刃平切锄铲；
权威例句
RETROGRADE NAILING VERSUS FIXED-ANGLE BLADE PLATING FOR SUPRACONDYLAR FEMORAL FRACTURES: A RANDOMIZED CONTROLLED TRIALController for a blade adjustment angle of at least one rotor blade of a wind power plant
Investigation of performance characteristics in a pump impeller with low blade discharge angle
Numerical identification of blade exit angle effect on the performance for a multistage centrifugal pump impeller
Economy, angle-blade damper kit
Miter saw for displaying angle of cutter blade cutting workpiece
Numerical and experimental investigation on effect of installation angle of rotor blade on axial flow fan
Blade Exit Angle Effects on Performance of a Standard Industrial Centrifugal Oil Pump
A new double-angle blade for direct laryngoscopy.
Acoustic Characteristics of an Axial Flow Fan With Abnormal Installation Angle of Single Blade
1. A pitch controller rotates each blade around a bearing, setting it to the best angle for the wind speed.
同时间距控制装置会根据风速旋转安装在轴承上的风叶，保持在最佳角度。
youdao
2. Cut straight down, at a right Angle to board. with a quick stroke of the knife blade. pushing the potato slice away from the potato as you hit the board.
笔直往下切，让刀与刀板成直角后刀刃快速下压，切到底时用刀把刚切下来的土豆片推到一边。
youdao
3. Whether you're aiming for layers of plywood or cardboard or a bale of hay, if that foot-long blade hits an Angle, it could come ricocheting back at you.
不管是几层胶合板、纸板还是一大捆干草，万一飞刀打在不平的表面上，它很可能会朝你自己反弹回来。
youdao
4. The knife blade Angle is small, when cutting labor.
现有菜刀的刀刃角度较小，切菜时省力。
youdao
5. The amount of blade twist is called the pitch angle .
叶片扭曲的量被称之螺旋上升角。
youdao
6. The settle time is related to the Angle of harrow leaf and harrow blade and principal axis speed of drier.
物料在小干燥盘上的停留时间与耙叶和耙刃的角度以及干燥机主轴的转速有关。
youdao
7. Edge points and single blade and double edge, Angle arbitrarily, can receive customized special specifications cutter.
刃口分单面刃和双面刃，角度任意，可接受定制特殊规格尺寸刀具。
youdao
8. The Angle of conical structure and the distance of round aperture were adjusted, the structure and production of distribution blade of blender were improved.
调整了筒体倒锥体的角度及环缝隙的距离，并改进了搅拌器的分散叶片的结构和制作。
youdao
9. The three bladed Warp Drive composite propeller was mounted between the two halves of its clamshell hub and the initial blade Angle was set.
三刀刃综合经驱动器螺旋桨展开之间的两半，其翻盖式枢纽的地位和初步的叶片角度定。
youdao
10. It has been shown in application that the controller designed by this mathematical model could improve the adjusting performance of blade Angle.
实践中采用这种数学模型所设计的控制器极大改善了叶片角度的调节性能。
youdao
11. It is made of aluminum alloy with a certain Angle of helical blade, and is fixed at the front part of shell constriction. It forces the fluid to form strong eddy.
用铝合金制成，具有一定角度的螺旋叶片，它固定在壳体收缩段前部，强迫流体产生强烈的漩涡流。
youdao
12. Two centrifugal compressor impellers with different meridional shape and blade Angle were designed using computer-aided integrated design systems.
采用离心压气机计算机辅助集成设计系统，设计了两个不同子午形面和叶片角的离心压气机叶轮。
youdao
13. The NTSB found that the flight crew would have been unable to perceive any problem with the airplane until the propeller blade Angle was between 24 and 26 degrees.
NTSB发现机组人员都已无法感知飞机的任何问题，直到螺旋桨叶片角度为24度和26度之间。
youdao
14. For improving the design reliability and efficiency of the stubble roller, visualized dynamic gap Angle was obtained though drawing blade moving track according to movement equation using ug - NX3.
为提高灭茬刀辊设计的可靠性和效率，基于UG-NX 3软件，根据运动方程绘制刀刃运动轨迹，形象直观的获取动态隙角。
youdao
15. Selection of the primary and secondary airflow rate, the guide Angle of the blade, the primary air ratio as well as the material for manufacture of the burner nozzle are given.
然后介绍了一、二次风速，旋流叶片的导角，一次空气比例系数等参数的选择及制造烧嘴的材料。
youdao
16. This paper put forward the fundamental idea of design of blade mechanical seal with the structure of end assisting seal from the angle of improving the seal structure.
文章从改进密封结构的角度提出了带有端面辅助密封结构的刀口机械密封装置结构设计的基本思路。
youdao
17. I rapidly fire an aggression ugg tall copy blade apt emulate wily Angle apt buffet toward the emphatic superior, he basically impedes no apt live.
我迅速发动攻击，影刃顺着刁钻的角度打向杰出高手，他根本阻挡不住。
youdao
18. The effects of blade elevation Angle of rotating_stream_tray scrubber affecting process on the wet calcium FGD process was studied experimentally.
实验研究了旋流塔板叶片仰角对钙基湿法烟气脱硫工艺的影响。
youdao
19. The method of performance prediction for multi-vane centrifugal fan with variable blade angle is presented.
在试验基础上提出了多叶通风机变叶片安装角性能计算方法。
youdao
20. Standard machine is installed MD-100 dedicated system and PLC controller, Adjustment of shearing counting, back gauge, shearing Angle and blade gap is simple and convenient.
标配采用MD- 100专用系统及PLC控制器，剪切计数、后挡料、剪切角及刀口间隙的调节直观、简单、方便。
youdao
21. The main blade and the blade Angle secant Angle precision instrument by the visual display.
主锯片及割线锯片倾角由精密角度仪直观显示。
youdao
22. Variable Angle adjustment from the structure, the axial flow pump impeller with enormous wheels, easy to install adjustable Angle blade.
变角调节从构造来看，轴流泵叶轮具有巨大的轮毂，便于安装可调角度的叶片。
youdao
23. Blade Angle adjusting mechanism to adjust and hydraulic machinery have two types of regulation.
叶片角度调节机构有机械调节和液压调节两种。
youdao
24. At least one blade Angle bearing of a pair of such bearings permits an axial movement of the respective tension or carrier bar, whereby the latter is able to take up bending loads.
至少有一个叶片角度轴承的一对，如轴承许可证的轴向运动各自的紧张或承运人的酒吧，而后者则是能够采取行动的弯曲载荷。
youdao
25. The results show that the performance of curved blade is influenced not only by the end Angle, but also by the shape and length of the stacking line.
结果表明，弯曲叶片性能不仅与叶片两端部的弯曲角度有关，也与积叠线的形状和长度有关。
youdao
26. The style of the blade depends largely on the edge angle.
刀片的形式不主给取决于刃角。
youdao
27. The axe blade Angle is larger.
斧头的刀刃角度较大。
youdao
28. Analyze the influence of main parameters including exp. area ratio, blade number, collective pitch angle, section shape, cyclic pitch angle and rake angle on the performance of VVP.
本文分析了盘面比、叶数、整体螺距角、周期螺距角、纵倾角、叶剖面形状等主要参数的变化对全方向推进器水动力性能的影响。
youdao
29. Objectives: The angled blade plate has been the historical standard in fixed-angle extramedullary subtrochanteric femur fracture fixation, but it requires an extensile lateral approach to the femur.
目的：过去采用角钢板髓外固定作为股骨转子下骨折标准方法，但需要较长的外侧切口到达股骨。
youdao
30. Objectives: The angled blade plate has been the historical standard in fixed-angle extramedullary subtrochanteric femur fracture fixation, but it requires an extensile lateral approach to the femur.
目的：过去采用角钢板髓外固定作为股骨转子下骨折标准方法，但需要较长的外侧切口到达股骨。
youdao
angle blade
