axial load
推荐文章
释义
轴向载荷；
双语例句
The tank location for these vehicles is chosen for optimum airframe design for axial loads.
这些飞行器上的油箱位置是相对轴向载荷作最佳结构设计来选择的。
Full complement cylindrical roller bearings with flanges on both inner and outer rings can support axial loads in one direction.
内圈和外圈都带法兰的满滚子圆柱滚子轴承可支撑一个方向上的轴向载荷。
The design of these wall frames does not utilise the full strengthening effects of the plasterboard in carrying the axial loads.
在这些墙架的设计中没有利用石膏板在承担轴向荷载方面的增强效应。
权威例句
Axial Load Behavior of Stiffened Concrete-Filled Steel ColumnsAxial load behavior of square CFT stub column with binding bars
Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns
Study of combined bending and axial load in reinforced concrete members
An analytical model to predict axial load in grouted rock bolt for soft rock tunnelling
Assessment of RC Columns Under Combined Biaxial Bending and Axial Load
Transverse vibrations of double-walled carbon nanotubes under compressive axial load
Integrally stiffened axial load carrying skin panels for primary aircraft structure and closed loop manufacturing methods for making...
Behavior of High-Strength Concrete Columns Under Cyclic Flexure and Constant Axial Load
Lumbar spine disc height and curvature responses to an axial load generated by a compression device compatible with magnetic resonan...
1. Larger contact Angle type has better axial load capability.
更大的接触角型具有较好的轴向负荷能力。
youdao
2. When the shaft has axial load, it can be used in combination with other bearings.
当有轴向负荷时，应和其他轴承组合使用，它不限。
youdao
3. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
单列角接触球轴承可承受径向，轴向或复合负荷，不过，任何轴向负载必须在一个方向。
youdao
4. Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
双向压力球轴承有安装于轴上的中间圈和两个外圈，在中间圈与外圈之间分别加有钢球，能够承受双向轴向负荷。
youdao
5. Radial loading is the amount of weight placed vertically above the axle. Sitting on a trike places an axial load on the bearings. The drawing below is a cross-sectional view of a radial bearing.
径向负荷的重量是多少轴垂直放在上面。三轮车坐在一个地方对轴承的轴向负荷。下图是一个径向轴承截面的看法。
youdao
6. Tapered roller bearings for machine tools can be both radial and axial loads, double row tapered roller bearings can withstand two-way axial load.
机床用圆锥滚子轴承可同时承受径向和轴向载荷，双列圆锥滚子轴承可承受双向轴向载荷。
youdao
7. These bearings have a particularly high axial load carrying capacity and are used primarily as thrust bearings in rolling mill applications.
这些轴承有特别高的轴向负荷能力，主要用作轧钢机里的推力轴承。
youdao
8. This type of bearings is separable which can only carry axial load.
是可分离型轴承，只能承受轴向载荷。
youdao
9. If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated.
如实际负荷为径向和轴向复合负荷，则必须计算当量轴承静负荷。
youdao
10. The regression statistical method has been used to analyze the law of stress and strain as The Times under the function of axial load increases.
研究了铺装层应力场分布，回归统计了随轴载作用次数增加，应力应变的变化规律。
youdao
11. Other test parameters include the level of axial load in the CFST column, the load level in the RC beam and the beam-column stiffness ratio.
其他测试参数包括水平轴向载荷作用下的钢管混凝土柱、水平荷载下的钢筋混凝土梁和框架梁柱的刚度比。
youdao
12. This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
youdao
13. OBJECTIVE: To investigate the impact of axial load on lumbar dural sac.
目的：实验拟探讨轴向负荷对腰椎硬膜囊的影响。
youdao
14. This type of bearings is separable, which can only carry axial load.
推力球轴承是可分离型轴承，只能承受轴向载荷。
youdao
15. The higher the speed should not adopt thrust ball bearings available class bearings are subjected to purely axial load.
在转速较高不宜采用推力球轴承的情况下可用该类轴承承受纯轴向负荷。
youdao
16. With this situation, any amount of axial load can be applied to compressive bar of arbitrary length without bending.
在此状态下可在任意长度的压杆上，加任意大小的轴向载荷，而不产生弯曲。
youdao
17. In this paper, the displacement and stress fields for a composite laminated circular shell under axial load are solved by. using three-dimensional anisotropic elasticity theory.
本文采用三维各向异性弹性理论直接求解纤维增强的复合材料叠层圆柱壳体在轴向载荷作用下的位移场和应力场。
youdao
18. There are two bi-directional thrust bearing rolling bodies, each listed in only one direction of axial load.
有两列滚动体的双向推力滚动轴承，每列只在一个方向承受轴向负荷。
youdao
19. Does not fill the tank of these bearings, in addition to radial loads, but also can withstand the axial load in both directions, even at high speeds as well.
这类轴承没有填充槽，除径向载荷外，还能承受双向作用的轴向负荷，即使在高转速下也是如此。
youdao
20. Through analyzing the comprehensive inspections of the failure bearing, it is determined that undertaking early failure is caused by bearing ever-large axial load during working.
通过对故障轴承的综合检测及对检测结果的分析，确定该轴承工作过程中承受了过大的轴向负荷，是造成轴承早期失效的原因。
youdao
21. A direction can only carry axial load, can't bear radial load.
只能承受一个方向的轴向载荷，不能承受径向载荷。
youdao
22. The rule of lateral vibration under axial load was studied in theory, the inherent frequency of drilling string was obtained.
从理论上分析了轴向载荷存在的情况下钻柱横向自由振动的规律，获得了钻柱横向振动固有频率。
youdao
23. Adjusting roller bearings can bear the load and two radial direction of the axial load.
调心滚子轴承可以承受径向负荷及二个方向的轴向负荷。
youdao
24. High radial load capacity, especially for heavy loads or vibration, but can not afford a pure axial load.
有高的径向载荷能力，特别适用于重载或振动载荷下工作，但不能承受纯轴向载荷。
youdao
25. Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.
深沟球轴承属于不可分离型轴承，主要承受径向载荷，也可承受一定量的轴向载荷。
youdao
26. Bearing a single row thrust ball bearings to the heart, which has at the same time to bear a greater bearing axial load and radial load capacity.
轴承采用了单列向心推力球轴承，这种轴承具有同时承受较大的轴向荷载和径向荷载的能力。
youdao
27. TIMKEN-aligning roller bearings with two rollers, the main path a load to bear, but also can withstand axial load in either direction.
TIMKEN调心滚子轴承具有两列滚子，主要承受径一载荷，同时也能承受任一方向的轴向载荷。
youdao
28. Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.
回转支承轴承是一种能够承受综合负荷的大型支承轴承，可同时承受较大的轴向负荷、径向负荷和倾翻力矩。
youdao
29. Tapered members under the axial load: the stresses formulas of the tapered members and those of the prismatic ones are identical.
轴向荷载作用下：楔形变截面构件的正应力和剪应力公式与等截面构件的正应力公式比较接近。
youdao
30. Tapered members under the axial load: the stresses formulas of the tapered members and those of the prismatic ones are identical.
轴向荷载作用下：楔形变截面构件的正应力和剪应力公式与等截面构件的正应力公式比较接近。
youdao
axial load
