nitriding
推荐文章
v.
渗氮；
英英释义
nitride[ 'naitraidiŋ, -tri- ]
n.a compound containing nitrogen and a more electropositive element (such as phosphorus or a metal)
词组短语
nitriding furnace氮化炉
nitriding layer渗氮层
nitriding steel氮化钢，渗氮钢
权威例句
Laser Nitriding of MetalsNitriding Iron at Lower Temperatures
Plasma nitriding of stainless steels at low temperatures
A Study of Active Screen Plasma Nitriding
Study of the Active Screen Plasma Nitriding
Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure
Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature
Tribological effects of surface texturing on nitriding steel for high-performance engine applications
Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods
Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding
1. Liquid nitriding adds more nitrogen and less carbon than either cyaniding or carburizing in cyanide baths.
液体渗氮时在氰化物溶液中加入比氰化及渗碳都较多的氮和较少的碳。
www.mapeng.net
2. QPQ technology is a surface treatment technology which consists essentially of liquid nitriding and liquid oxidizing.
QPQ技术是一种主要包括盐浴渗氮和盐浴氧化的表面处理技术。
www.chemyq.com
3. Nitriding develops extreme hardness in the surface of steel. This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.
渗氮在钢表面获得远远超出正常标准的硬度。其硬度范围为900到1，100布氏硬度，这远高于普通表面硬化所获得的硬度。
www.mapeng.net
4. Research on the dielectric barrier discharge nitrogen nitriding at atmospheric pressure have consumedly progressed.
利用介质阻挡放电进行常压氮气渗氮研究取得突破性进展。
www.xjishu.com
5. The results indicate that it has visible effect on restraining arc discharge and hollow cathode discharge as well as ion nitriding on high-chrome steel material surface.
结果表明，交流脉冲放电在抑制弧光放电和空心阴极效应方面是非常有效的，对于高铬钢材料表面的离子渗氮作用是明显的。
dict.cnki.net
6. The surface invalidation of H13 hot extruding gear die is analyzed, ion nitriding is used in order to improve H13 hot extruding gear die life.
对H13热挤压齿轮模的表面失效进行了分析，为提高H13热挤压齿轮模的寿命对其进行了离子渗氮。
dict.cnki.net
7. The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.
研究了在不同气氛下进行离子渗氮对TC4钛合金渗氮层的组织与性能的影响。
danci.911cha.com
8. Using dielectric barrier discharge(DBD), atmospheric pressure non equilibrium plasma nitriding technology is under development at self made equipment.
利用介质阻挡放电，在自行研制的设备上进行常压非平衡等离子体渗氮。
dict.cnki.net
9. The status and development trend of surface treatments, such as nitriding, vapor deposition, plasma modification and multiplex surface treatment technology used for cutting tools were described.
介绍了渗氮、超低温处理、气相沉积、等离子改性以及复合表面处理技术等在切削刀具中的应用现状和发展趋势。
dict.cnki.net
10. Many studies and practice indicate that the service life of the stainless steel parts can be prolonged by optimally choosing the material and plasma nitriding treating.
研究与实践证明，通过合理的选材，采用等离子渗氮处理，能更好地挖掘不锈钢的潜力，延长不锈钢零件寿命。
www.chemyq.com
11. According to the working characters of the ion nitriding furnace, ion carburizing furnace and ion metallizing furnace the peculiar control way and many 555 time base chips were used in this circuit.
根据离子渗氮炉、离子渗碳炉、离子渗金属炉工况的特点，本电路采用了独特的控制方式，大量使用了性能优良的555时基片。
dict.cnki.net
12. The corrosive behavior of Pulse Vacuum Nitriding coating and plain sample were investigated by an apparatus of electrochemical measurement.
通过电化学测试方法研究了脉冲真空渗氮防腐层及裸样的抗腐蚀性能。
dict.cnki.net
13. Various influence factors were analyzed in detail on nitriding distortion of the piston rings made of martensitic stainless steel based on abundant researches.
在大量试验的基础上，深入分析并研究了马氏体不锈钢活塞环渗氮畸变的各项影响因素。
www.chemyq.com
14. This design has been successfully applied in plasma nitriding controlling system. The fact indicates that this system has simple structure and stable performance, and also tend to be expanded.
该设计方案已成功的应用于等离子体渗氮控制系统，实际应用表明：系统结构简单，易于扩充，性能稳定可靠。
dict.cnki.net
15. Paste ion chromizing by ion nitriding furnace was introduced.
利用普通离子渗氮炉进行了膏剂离子渗铬。
dict.cnki.net
16. The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
dict.cnki.net
17. Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
特殊的材料包括球墨铸铁和钢煅品，大部分机轴经过热处理，表面硬化、渗氮和感应淬火。
www.e-gtm.com.cn
18. In this paper, the new nitriding technology was briefly introduced.
简要介绍了离子渗氮技术的最新进展。
www.chemyq.com
19. This can be done carburizing, cyaniding, nitriding, carbonitriding, induction hardening, and flame hardening.
这可以通过渗碳剂、氰化、渗氮、碳氮共渗、感应淬火、火焰淬火来完成。
cid-1136830e27e23174.spaces.live.com
20. It is recommended that these steels be machined and heat-treated before nitriding, because there is no scale or further work necessary after this process.
建议对这种钢在渗氮前先机加工和热处理，因为渗氮后没有剥落并不需要更多的加工。
www.mapeng.net
21. The pre-heat treatment and ion nitriding of H13 steel was studied.
研究了H13钢的预先热处理工艺和离子渗氮工艺。
www.dictall.com
22. The results show that the nitriding depth was determined accurately by the carbon concentration profiles.
结果表明：由渗氮试样的碳浓度分布曲线可精确确定渗氮层深。
dict.cnki.net
23. The structure property of alloying nitriding is studied .
针对合金化渗氮的组织性能进行了研究。
www.dictall.com
24. Plasma nitriding treatments of 304 austenitic stainless steel were performed at 400 ℃ for different time.
对304奥氏体不锈钢进行400℃不同时间的离子渗氮处理。
danci.911cha.com
25. Liquid nitriding utilizes molten cyanide salts and, as in gas nitriding, the temperature is held below the transformation range.
液体渗氮利用熔化的氰化物盐，就像气体渗氮，温度保持在低于转化范围内。
www.mapeng.net
26. The longer nitriding time, the more amount nitrogen pick-ups.
渗氮时间愈长，试样的氮化量愈多。
dict.cnki.net
27. Moreover, with the nitriding temperature rising, the sample pick-ups increases correspondingly, and so the oxygen content.
此外，随渗氮温度的增高，试样的增重率提高，含氧量显著增高。
dict.cnki.net
28. In addition, artificial neural network is applied to establish the mathematical model of the nitriding of solid metal manganese, which is a powerful tool of predicting the technique parameters.
在此基础上，利用人工神经网络构建了金属锰渗氮过程的数学模型，为研究金属锰在不同渗氮条件下的性能预测奠定了基础。
www.chemyq.com
29. In addition, artificial neural network is applied to establish the mathematical model of the nitriding of solid metal manganese, which is a powerful tool of predicting the technique parameters.
在此基础上，利用人工神经网络构建了金属锰渗氮过程的数学模型，为研究金属锰在不同渗氮条件下的性能预测奠定了基础。
www.chemyq.com
30. liquid nitriding
液体渗氮
-- 来源 -- 英汉 - 翻译参考[网络]
31. plasma nitriding
离子氮化
-- 来源 -- 英汉 - 翻译样例 - 产品
32. vacuum nitriding
真空氮化
-- 来源 -- 英汉 - 翻译样例 - 产品
33. nitriding atmosphere
氮化气氛
-- 来源 -- 英汉 - 翻译参考[网络]
34. single stage nitriding
等温渗氮
-- 来源 -- 英汉 - 翻译样例 - 产品
35. blank nitriding
空氮化
-- 来源 -- 英汉 - 翻译参考[网络]
36. selective nitriding
局部渗氮
-- 来源 -- 英汉 - 翻译参考[网络]
37. multiple-stage nitriding
多段渗氮
-- 来源 -- 英汉 - 翻译参考[网络]
38. ammonia nitriding
氨氮化
-- 来源 -- 英汉 - 翻译参考[网络]
39. nitriding depth
渗氮层深度
-- 来源 -- 英汉 - 翻译参考[网络]
nitriding
