mandrel
n. （圆形）心轴
n.
心轴；芯棒；锯轴；
英英释义
mandrel[ 'mændrəl ]
n.any of various rotating shafts that serve as axes for larger rotating parts
同义词：spindlemandrilarbor
词组短语
mandrel mill芯棒式轧管机；芯棒式无缝管轧机
双语例句
用作名词(n.)
The winder will consist of an air expanded winding mandrel.
卷取机由气动胀缩卷筒组成。
权威例句
Mandrel for supporting a stent and a method of using the mandrel to coat a stentEngineered alignment in media equivalents: magnetic prealignment and mandrel compaction.
Casing expanding mandrel
TOPICAL REVIEW: Overview of high performance fibre-optic sensing
Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrix
An anisotropic biphasic theory of tissue-equivalent mechanics: the interplay among cell traction, fibrillar network deformation, fib...
Smear Effects of Vertical Drains on Soft Bangkok Clay
Method of attaching objects to bone
Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings
The effects of surgical exposures of dental pulps in germfree and conventional laboratory rats
mandrel (n.)
"miner's pick," 1510s, of unknown origin; perhaps borrowed from French mandrin, itself of unknown origin. Also applied from 17c. to parts of a lathe or a circular saw.
1. The centers must be aligned and the mandrel must be free of burrs.
这些中心点必须排列成一行，并且保证心轴上没有毛刺的现象出现。
www.366translation.com
2. After the consolidation of the composite ring in tension winding, the mandrel is drawn out, and then a hollow ring is formed.
纤维束张紧力缠绕的复合材料厚环固化成型以后，再抽出缠绕芯轴形成空心环，这一过程称为内孔卸载。
www.dictall.com
3. To produce specialty tubing, this procedure uses a drawbench to pull tubing through a die and over a mandrel, allowing excellent control of the inside diameter and wall thickness.
为了制造出更精密的管子，这一程序通过拔管机使管子经过钢型和心轴的拉制，这样管子的内径和壁厚精密度就能控制的很好。
www.023java.com
4. As the most critical factor of MPM process, the groove design of fewer-stand mandrel-retained MPM significantly affects the rolling course as well as product quality.
少机架限动芯棒连轧管机孔型设计是连轧管工艺的核心，对轧制过程的建立和产品质量起着极其重要的作用。
www.chemyq.com
5. Hardware and software configuration of drive system with position controller, DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed.
分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。
www.dictall.com
6. Through experiments, the method and values to ensure spinning technology parameters of no - mandrel roller were gained.
通过实验，给出了无心轴托辊管体的旋压过程中工艺参数的确定方法和数值。
dict.cnki.net
7. The rubber tube was expansed after inflated, then closed. The soft core that could be favourable to mandrel stripping was used to rubber special tube.
用一纯橡胶管充气后使其膨胀然后将其封闭，用作橡胶异型管生产中使用的软芯，能够有利于脱芯。
www.chemyq.com
8. Spiral mandrel blown-film die is advanced and widely used in film blowing which is one of the most popular processing for plastics film.
薄膜挤出吹塑是应用最广泛的塑料薄膜加工方法之一，而螺旋芯棒式机头则是应用最为广泛的、先进的吹膜机头。
www.dictall.com
9. The results show that: the springback angle of bent tube increases with the bending angle, the gap between mandrel and tube, and the hardening coefficient, but decreases with the hardenability value.
结果表明：回弹角随弯曲角、芯棒与管壁间隙及材料硬化系数的增大而增大，随材料硬化指数的增大而减小。
dict.cnki.net
10. Electric heater, screw elements, barrel, Mandrel series of production, living in the same industry-leading level of domestic.
电加热器、螺纹元件、机筒、芯轴系列产品的生产，居于国内同行业的领先水平。
detail.china.alibaba.com
11. The fracture mode of cold-rolling mandrel is mainly early fatigue fracture.
冷轧芯辊的失效方式主要是过早疲劳断裂。
dict.cnki.net
12. Mechanical mandrel, axially actuated via machine pull rod.
机械夹紧心轴，通过机床拉杆轴向操纵。
www.hujiang.com
13. A "position effect" usually occurs in cold bending test of ribbed steel bars, when the bending mandrel is misaligned with the bar surface.
冷弯试验时，钢筋表面相对弯芯放置位置不同，钢筋的变形部位将产生“位置效应”。
dict.cnki.net
14. According to the results of the static analysis, the easier areas in the surface of mandrel have been found.
同时在软件中对芯辊进行静态力学分析，找出在轧制过程中芯辊表面受力危险区域。
fanyi.chaci.org
15. Advantages of employment of semi-floating mandrel mill to produce small and medium tubes are elaborated.
提出了小型无缝钢管生产机组选用半浮动芯棒连轧工艺的优势。
dict.cnki.net
16. The mandrel(including flexible balls) is the key to improving the forming limit and forming precision in thin-walled tube NC bending process.
薄壁管数控弯曲中带芯头的柔性芯模是提高薄壁管件成形极限和成形精度的关键因素。
www.dictall.com
17. The microcomputer controlled filament- wound machine for forming tee pipe, processing mechanism, and mandrel design are given in this paper.
本文简单介绍了由计算机控制纤维缠绕三通管的设备工作原理及芯模设计。
www.chemyq.com
18. Call us with your Mandrel Bender application, we have the machines and expertise to provide you with the right solution.
叫我们与心轴弯曲的应用，我们有机器和专业为您提供正确的解决方案。
wuxijinli.com
19. A hole is drilled in the center and it is bolted to a mandrel so that the rest of the machining operations can be performed.
钻一个洞，是在中央，这是一个心轴螺栓，使其余的加工操作可以执行。
www.tech-domain.com
20. The structural design of molding mandrel of pyrophillite was improved.
对叶块成型芯轴的结构进行了设计改进。
lib.cqvip.com
21. In order to avoid damage to the reinforcement the diameter to which the bar is bent (Mandrel diameter) should not be less than .
为了避免损坏钢筋，钢筋最大弯曲处的直径（芯轴直径）最小应不低于。
gatefanyi.com
22. The technology of designing and making for extrusion die with small die-mandrel by several examples is introduced.
通过实例介绍了具有小模芯的铝型材挤压模的设计和制造方法。
www.dictall.com
23. One way is to use a hollow billet and then use a fixed or floating mandrel .
一种方法是使用空心坯，然后使用固定或浮动芯棒。
danci.911cha.org
24. To study the mechanism of production and regularities of distribution for residual stress in pipe drawing with fixed mandrel, the drawing process was investigated by elastic-plastic FEM.
为了研究固定短芯棒拔管残余应力的产生机理和分布规律，采用弹塑性有限元法模拟拉拔过程，讨论模具形状参数、拉拔变形参数、摩擦条件对残余应力的影响。
www.dictall.com
25. To study the mechanism of production and regularities of distribution for residual stress in pipe drawing with fixed mandrel, the drawing process was investigated by elastic-plastic FEM.
为了研究固定短芯棒拔管残余应力的产生机理和分布规律，采用弹塑性有限元法模拟拉拔过程，讨论模具形状参数、拉拔变形参数、摩擦条件对残余应力的影响。
www.dictall.com
26. After the mandrel is melted, a thin layer of alloy remains on the propellant surface.
此心轴溶化之后，在推进剂表面上留有一薄层的合金。
-- 来源 -- 英汉 - 辞典例句
27. splined mandrel
花键心轴
-- 来源 -- 英汉 - 翻译参考[网络]
28. ring mandrel
介指铁
-- 来源 -- 英汉 - 翻译样例 - 工程
29. mandrel stroke limiter
顶杆行程限位器
-- 来源 -- 英汉 - 翻译参考[网络]
30. retained mandrel
限动芯棒
-- 来源 -- 英汉 - 翻译参考[网络]
31. "The pyramid mandrel of hydraulic diameter control(with pressure drop protection)with segments is used, which is of swinging console type. The floating alignment is accepted. The recoiling is controlled by EPC. "
卷取机结构采用四棱锥卷筒、液压涨缩(带失压保护)、镶块变径、悬臂式卷轴,采用旋转式支撑、浮动对中,由EPC控制。
-- 来源 -- 英汉 - 翻译样例 - 工程
32. mandrel wrapped hose
有芯式夹布胶管
-- 来源 -- 英汉 - 翻译参考[网络]
33. soft ductile mandrel
软韧性芯棒
-- 来源 -- 英汉 - 翻译参考[网络]
34. A disk attached to the mandrel of a lathe to hold the work to be turned.
面板安装在车床活动芯轴上以使工件转动的盘
-- 来源 -- 英汉 - 短句参考
35. standard mandrel
标准心轴
-- 来源 -- 英汉 - 翻译参考[网络]
mandrel
