soldered
推荐文章
v.
（使）焊接，焊合( solder的过去式和过去分词 )；
英英释义
solder
n.an alloy (usually of lead and tin) used when melted to join two metal surfaces
v.join or fuse with solder
"solder these two pipes together"
词组短语
solder joint软焊接合；钎焊接头
solder paste焊膏；焊锡膏
solder wire焊丝，焊锡丝；钎料丝
solder ball锡球；焊锡球；锡珠
solder mask焊接掩模；焊接淹模
tin solder焊锡；锡焊条，锡焊料；软焊料
双语例句
用作名词(n.)
Generally the same fluxes will work for lead-free solder.
一般来说,相同的焊剂用于无铅焊料是有效的。
An ideal connection that puts any solder to shame.
这种理想的连结方式，让其它各类接合方式瞠乎其后。
用作动词(v.)
He soldered the wire back on.
他把金属丝重新焊上去了。
Surface to solder are gold and clean.
待焊接的表面是清洁的金面。
Do not solder directly to cells or batteries.
不要直接对电池进行焊接。
权威例句
SEMICONDUCTOR CIRCUIT ASSEMBLY HAVING A PLATED LEADFRAME INCLUDING GOLD SELECTIVELY COVERING AREAS TO BE SOLDEREDDrop Impact Reliability Testing for Lead-Free and Leaded Soldered IC Packages
Mechanical property of joint soldered with SnAgCu containing ultra-low silver content
Press fit/pressure-soldered joint—improve your press fit
Microstrip-Slotline Transitions: Modeling and Experimental Investigation
Distributed piezoelectric-polymer active vibration control of a cantilever beam
A survey on industrial vision systems, applications and tools
Energy-aware lossless data compression
Constitutive relations for tin-based solder joints
Constitutive relations for tin-based solder joints
1. I wish he'd been soldered in lead.
我愿把他用铅焊住。
youdao
2. Soldered or tinned annealed wire.
焊锡或镀锡的导线。
youdao
3. I then soldered up the top and bottom of the boiler.
当时我焊接起来的顶部和底部锅炉。
youdao
4. I superglued the switch and the soldered the contacts.
我用强力胶水粘上了开关，并焊接好了触点。
youdao
5. The third step, the cable soldered to the solder hole.
第三步，把电缆焊接到焊接孔上。
youdao
6. Measurement point is soldered by high temperature tin.
量测点以高温锡丝焊接。
youdao
7. It consists of about 10 parts which I soldered in 2 steps.
它约十个部分，我焊接在2个步骤。
youdao
8. A broken friendship may be soldered but will never be sound.
破裂的友谊可以重归于好，但绝不会亲密无间。
youdao
9. The third step, the cable soldered to the pin hole soldering.
第三步，把电缆焊接到针焊接孔上。
youdao
10. The battery was not soldered to anything and was easy to replace.
l电池并无焊接，可以轻松更换。
youdao
11. I then stuck one of my NiCu rods into the hole and soldered it into place.
当时我坚持我的一个新生儿加护中心棒到孔和焊接成的地方。
youdao
12. Once you have soldered the first batch of LEDs, it's time to add even more.
一旦你有焊接led的第一批，是时候增加更多。
youdao
13. I endeavoured to uncap the casement, but the hook was soldered into the staple.
我试着去打开那窗子，但窗钩给焊在钩环里了。
youdao
14. The international standard specifies a soldered pin connector for circuit boards.
国际标准为电路板选定了焊接针连接器。
youdao
15. The capsule element system consists of two capsule element halves soldered together.
膜盒系统包括两个焊接在一起的膜盒半元件。
youdao
16. I then placed the spacer where I wanted it to be soldered and applied heat to the joint.
然后我把间隔的地方我想它是焊接和应用热向联合。
youdao
17. There are sixteen (16) relays inside the box that are soldered in place to a perf board.
有16(16)继电器方框内是在焊接的地方，一个性能董事会。
youdao
18. The was soldered into the staple: a circumstance observed by me when awake, but forgotten.
我醒的时候看见窗扣是和台子焊在一起的，但是忘记了。
youdao
19. Air distribution piping systems almost invariably use soft copper tubing with soldered fittings.
压缩空气的分配管道系统无例外地都是用焊接管件的铜管。
youdao
20. Careful inspection showed that the statue's head had been cast separately and soldered in place.
仔细检查发现雕像的头部是铸好后再焊接上去的。
youdao
21. If we are unable to remove the oxide coat, even it is reluctantly soldered, the bonding strength is very weak.
如果我们未能将氧化层除去，即使勉强沾上焊锡，其结合力量也是非常弱的。
youdao
22. In this photo, a worker heats a computer board on a steel surface to remove the computer chips soldered into it.
图中的这位工人在一块钢板表面加热一块电脑电路板以取下焊接在上面的芯片原件。
youdao
23. But nine days later a single electrical splice overheated because it had been badly soldered, and disaster struck.
但9天之后一个简单的电气连接因为焊接不良过热造成伤害。
youdao
24. A copper foil solution is used to bond the glass pieces together, and then the pieces are soldered together firmly.
铜箔解决方案可使玻璃碎片结合在一起，然后一起焊接牢固。
youdao
25. Replacement of diodes that are soldered to the heat sink is permitted provided that a controlled heat source is used.
如果使用了可以控制的热源，可以更换焊到散热片散热板上的二极管。
youdao
26. I resolved to silence it, if possible; I endeavoured to unhasp the casement, but the hook was soldered into the staple.
我决定把这声音止住，如果可能的话。我试着去打开那窗子，但窗钩给焊在钩环里了。
youdao
27. The capacitors shall not be effected by any radiated heat from the soldered PC board or other components after soldering.
焊接后的电容器不应受到任何已焊接p C板或其他元器件热辐射的影响。
youdao
28. The Nokia 5800's earpiece isn't soldered onto the contacts on the circuit board, rather it's pressed into the circuit board.
诺基亚5800的耳机是不是焊接在接触的电路板，而不是它的压入的电路板。
youdao
29. Solder end valves are designed to be soft soldered into lines without disassembly, using a low temperature solder (400of) (204oc).
焊接端口阀门适用于不需要拆卸的软焊接管线，采用低温焊料(204oc)。
youdao
30. Solder end valves are designed to be soft soldered into lines without disassembly, using a low temperature solder (400of) (204oc).
焊接端口阀门适用于不需要拆卸的软焊接管线，采用低温焊料(204oc)。
youdao
soldered
