weldments
n. 焊接；焊接件；[机] 焊件（weldment的复数）
英英释义
weldment
n.an assembly of parts welded together
词汇搭配
短语duplex weldments双相焊缝
thick weldments厚焊件
Weldments Toolbar焊件工具栏
laser weldments激光焊件
ultrasonical weldments超声波焊接
CSWP - Weldments焊件专家
Working with Weldments加工焊件
Sub-weldments子焊件
failure analysis of weldments焊件失效分析
更多收起网络短语双语例句
Fourtypes of
weldments
, i. e. , rotor,diaphragm,finalbladeandcasting are presented.其中有转子、隔板、末级叶片和铸件等四种焊接件。
Componentswill includelargecastingsand
weldments
,gears,gearboxes,largemotors,bearings,machining, and many other technical items.这些组件包括大型的铸件，焊接件，齿轮，变速箱，大型发动机，轴承，加工件等等。
One ofthetypesofmaterialdamage that can occur as a result of hydrogenchargingissulfidestresscracking(SSC) of hard
weldments
andmicrostructures,which is addressed bythisstandard.由氢渗透引起的材料损伤的类型之一为焊接件和微观结构的硫化物应力开裂（SSC），此类型由本标准规定。
更多双语例句权威例句
Corrosion of weldmentsFriction-stir weldments and systems and methods for producing the same
Fatigue behaviour of FSW and MIG weldments for two aluminium alloys
Creep crack growth behavior in the HAZ of weldments of W containing high Cr steel
Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser welding
Evaluation of the nucleation potential of intragranular acicular ferrite in steel weldments
Influence of Weld Cooling Rate on Microstructure and Mechanical Properties of Alloy 718 Weldments
Effect of rare earth elements on microstructure and oxidation behaviour in TIG weldments of AISI 316L stainless steel
Effects of pulse level of Nd-YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys
Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments
1. One of main reason for producing SCC in cladding plate weldments is the role of tensile residual stresses.
复板焊接结构出现应力腐蚀开裂的主要原因之一是拉伸残余应力的作用。
youdao
2. The results showed that the compatibility of the two weldments with high temperature sodium is good under these test conditions.
结果表明，在本试验条件下两种焊接件试样与高温钠具有好的相容性。
youdao
3. At a certain fracture toughness value, fracture probability of weldments increases with increase of the local brittle zone size.
在一定的断裂韧度前提下，随着局部脆性区尺寸的增加，焊接热影响区的脆断概率增加。
youdao
4. The magnetic density of weldments was detected and analyzed in different heat treatment conditions by metal magnetic memory technology.
用金属磁记忆检测技术，对不同热处理状态下焊接件的磁场强度进行了检测和分析。
youdao
5. Large weldments in die structure will be machined on the mating surfaces, screwed together, welded, and normalized before final machining.
模具中的大型烧焊件必须在配合面上进行加工并用螺丝所在一起，在最终加工前必须焊接及处理。
youdao
6. The destructive experiments of I-shaped weldments were carried out to verify the segmentation results. The results show that the provided method is feasible.
并采用剖切焊件的方法对分割结果进行了试验验证，试验结果表明提出的方法是可行的。
youdao
7. The results show that the weldments made from those metals in as-welded condition are instable in dimension and the rate of dimensional change decreases with time.
结果表明：七种材料的焊件都存在着尺寸不稳定，这种尺寸不稳定变形随时间的变化速率逐渐变缓；
youdao
8. A simple and practical rigid track for welding is presented to solve the quality of curved weldments. The guide is especially suitable for welding of high curvature scams.
本文介绍了一种简单实用的焊接刚性轨道，以解决曲线焊缝的质量问题，降低了生产成本，特别适用于刚性大曲率小的构件。
youdao
9. Based on the Schaeffler diagram, a software that predicts the weld microstructure of dissimilar metal weldments is designed, and its application is illustrated with an example.
利用舍夫勒图，设计了一套软件，用它可以预测异种钢接头焊缝组织，并通过一个具体实例说明了该软件的应用。
youdao
10. In this paper, the brittle fracture probability of weldments and the fracture toughness of heat affected zone (HAZ) were investigated according to the principle of the weakest link theory.
从最弱链模型的物理本质出发，探讨了影响焊接热影响区脆性断裂的主要因素。
youdao
11. The residual stress will produce in weldments and other construction parts during the manufacturing process and will harm their dimension stability and service life, and therefore must be relieved.
焊接件等结构件在制造过程中会产生残余应力，影响其尺寸稳定性和使用寿命，因此必须消除。
youdao
12. The residual stress will produce in weldments and other construction parts during the manufacturing process and will harm their dimension stability and service life, and therefore must be relieved.
焊接件等结构件在制造过程中会产生残余应力，影响其尺寸稳定性和使用寿命，因此必须消除。
youdao
weldments
