carburizing
推荐文章
n.
增碳剂，渗碳剂；
英英释义
carburize[ 'ka:bjuraiziŋ ]
v.unite with carbon
"carburize metal"
同义词：carbonizecarbonisecarburise
词组短语
gas carburizing气体渗碳；气体渗碳法
carburizing furnace渗碳炉
carburizing and quenching渗碳淬火
carburizing steel[机]渗碳钢
vacuum carburizing真空渗碳，真空渗碳法
权威例句
Carburizing of tantalum by radio-frequency plasma assisted chemical vapor depositionPlasma electrolytic surface carburizing and hardening of pure iron
Kinetics of low temperature plasma carburizing of austenitic stainless steels
High-temperature corrosion and creep of Ni-Cr-Fe alloys in carburizing and oxidizing environments
Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing
Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding
An investigation on surface properties of treated low carbon and alloyed steels (boriding and carburizing)
Computer Predictions and Experimental Verification of Residual Stresses and Distortion in Carburizing-Quenching of Steel
Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment : II. Carburization and carbide tra...
Study of the Preparation and Catalytic Performance of Molybdenum Carbide Catalysts Prepared with C 2 H 2 /H 2 Carburizing Mixture
1. Carburizing is one of the most widely used chemical heat treatment in mechanical industry.
渗碳是机械制造业中应用最广泛的一种化学热处理工艺。
danci.911cha.com
2. Liquid nitriding adds more nitrogen and less carbon than either cyaniding or carburizing in cyanide baths.
液体渗氮时在氰化物溶液中加入比氰化及渗碳都较多的氮和较少的碳。
www.mapeng.net
3. Cutting processing after forming can be carburizing processing, used to make the surface hard, center of high toughness instrumentation parts and axis wear parts.
切削加工成形后可以进行渗碳处理，用来制造表面硬、中心韧性高的仪器仪表零件及轴类耐磨件。
www.jsbls.com
4. The results show that RE can decrease activation energy for carburizing and expedite carburization.
结果表明，稀土能降低渗碳的激活能，有利于提高其渗碳速度。
dict.cnki.net
5. The relationship between growth of graded layer and carburizing time calculated by the equation is close to experimental results.
用此方程计算出的梯度层厚度随渗碳时间变化的关系与实际测量值比较接近。
dict.cnki.net
6. In the carburizing process, rare earth elements could promote the decomposition and absorption of medium and the diffusion of carbon atom.
在渗碳过程中，稀土元素对介质的分解，吸收和碳原子的扩散都起到了促进作用。
dict.cnki.net
7. The residual life of the tubes is estimated based on the carburizing damage analysis.
在考虑渗碳损伤的前提下对炉管的剩余寿命进行了评估。
www.chemyq.com
8. The article describes the composition and application of a box type gas carburizing heat treatment line with controllable atmosphere.
本文介绍了控制气氛箱式气体渗碳热处理生产线的组成及其应用情况。
dict.cnki.net
9. It can be quenched in a controlled atmosphere, thin carburizing, carbonitriding heat treatment process.
它能在可控气氛下进行淬火，薄层渗碳、碳氮共渗等热处理工艺。
www.chinafastener.net
10. CARBURIZING : The process of heating steel to a high temperature for a specific period of time while in contact with a material or gas which is high in carbon content.
渗碳：钢材热处理的一个工序，将钢材加热到高温并保持一段时间，期间让钢材与含碳量高的物质或气体接触。
www.chuangjiyuan.com
11. The result shows that carbon concentration distribution depends on carburizing time and carbon potential.
结果表明，渗层碳浓度分布主要由渗碳时间和炉气碳势决定；
dict.cnki.net
12. Experimental study of plasma carburization technology and analysis of wear test of carburizing layers are done aimed at alloy bar grate material surface.
针对合金篦条材料表面进行等离子渗碳技术的试验研究和渗层的耐磨性能实验分析。
dict.cnki.net
13. All requirements of high surface hardness and resistance, good toughness and center of all steel products to carburizing.
凡是要求表面具有较高的硬度和耐磨性，而中心具有良好韧性的所有钢制品都要进行渗碳。
danci.911cha.org
14. Applied in practice, this new technique has achieved good effects of quality-improving of carburizing gears, reproducability and energy-saving.
这种新技术已应用于生产，取得提高渗碳齿轮质量，重现性好和显著节能的效果。
dict.cnki.net
15. Rapid carburizing process by increasing furnace pressure is introduced and its mechanism is analysed.
介绍了快速压力渗碳工艺，并对其机理进行了分析。
www.chemyq.com
16. It is difficult to control heat treatment deformation of thin-wall parts in automatic transmission 4T65E in Buick Car by a routine controllable atmosphere carburizing following with oil quenching.
按常规可控气氛渗碳油淬工艺对别克轿车4T65E自动变速器中的薄壁零件进行热处理，零件的变形很难控制。
dict.cnki.net
17. The low-temperature RE carburizing technology is explored by a series of tests.
通过一系列试验，摸索出利用稀土低温渗碳技术。
lib.cqvip.com
18. A new research & development of continuous gas carburizing furnace is described.
介绍了新研制的网带连续式气体渗碳炉。
www.dictall.com
19. The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
dict.cnki.net
20. It is that the Chinese tradition kiln carburizing the example burning acieration handicraft, is also human being history of culture important component.
它是中国传统窑内熏烧渗碳工艺的典范，也是人类文化史的重要组成部分。
lib.cqvip.com
21. It can be considered a multi stage carburizing.
这一过程可以看成是一个多段渗碳过程。
dict.cnki.net
22. Purpose: Widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
http://www.yunhe518.com
23. By the investigation on the carbon potential control technology of the carburizing atmosphere of kerosene mixed with air, the effect of the factors on carbon potential is discussed.
通过对煤油加空气渗碳碳势控制技术的研究，探讨了煤油加空气渗碳过程中各工艺参数对碳势的影响。
dict.cnki.net
24. The paint film can peel off automatically from the surface in quenching procedure after carburizing, and it does not affect the quenching effects.
工件渗碳后直接淬火，涂料壳膜可从工件表面上自行脱落，不影响淬火效果。
dict.cnki.net
25. The effects of direct-quenching heat-treatment through gas carburizing on the spot contact fatigue life of crosspiece and bowl was mainly studied.
采用气体渗碳直接淬火热处理工艺对力车轴档、轴碗进行接触疲劳寿命的影响试验。
dict.cnki.net
26. Carburizing and nitriding processing microcomputer control system is introduced, and heat treating technological tests are presented.
介绍渗碳、氨化过程工艺参数的微机控制系统以及热处理工艺考核试验。
www.chemyq.com
27. The gear distortion of automobile rear bridge during carburizing heat treatment was discussed, the fault reason was analysed and relevant measure was put forward.
主要探讨了汽车后桥被动锥齿轮在渗碳热处理过程中出现的变形问题，并分析了缺陷产生的原因，提出相应的解决对策。
www.dictall.com
28. The gear distortion of automobile rear bridge during carburizing heat treatment was discussed, the fault reason was analysed and relevant measure was put forward.
主要探讨了汽车后桥被动锥齿轮在渗碳热处理过程中出现的变形问题，并分析了缺陷产生的原因，提出相应的解决对策。
www.dictall.com
29. surface carburizing
表面渗碳
-- 来源 -- 英汉 - 翻译参考[网络]
30. The case-hardening or carburizing process is in wide use.
表面淬火或渗碳法应用十分广泛。
-- 来源 -- 英汉 - 辞典例句
31. Box carburizing
封箱渗碳
-- 来源 -- 英汉 - 翻译样例 - 产品
32. salt bath carburizing
盐浴渗碳
-- 来源 -- 英汉 - 翻译参考[网络]
33. ion carburizing
离子渗碳处理
-- 来源 -- 英汉 - 翻译样例 - 产品
34. carburizing gas
渗碳气体
-- 来源 -- 英汉 - 翻译参考[网络]
35. vacuum carburizing
真空渗碳处理
-- 来源 -- 英汉 - 翻译样例 - 产品
36. solid carburizing
固体渗碳
-- 来源 -- 英汉 - 翻译参考[网络]
37. carburizing addition
增碳添加剂
-- 来源 -- 英汉 - 翻译参考[网络]
38. activating carburizing
活性渗碳
-- 来源 -- 英汉 - 翻译参考[网络]
carburizing
