expansion joint
推荐文章
释义
伸缩接头，伸缩节，补偿节，膨胀节[缝]，补偿器；
英英释义
Expansion joint
An expansion joint or movement joint is an assembly designed to safely absorb the heat-induced expansion and contraction of construction materials, to absorb vibration, to hold parts together, or to allow movement due to ground settlement or earthquakes. They are commonly found between sections of buildings, bridges, sidewalks, railway tracks, piping systems, ships, and other structures.
以上来源于:Wikipedia
双语例句
"accommodation note, lip service"
空头支票
Lay down the slip joint to the main deck.
将伸缩节吊到主甲板上。
Our company is stainless steel hose, expansion joints, heat exchangers and other products of professional producers.
我公司是不锈钢软管，膨胀节，热交换器等产品的专业生产厂家。
It is concluded that the repaired corrugate-expansion joint can restore its orinal quality and working-life.
经实际应用证明，修复后的波纹补偿器能够达到原有的质量性能及使用寿命。
权威例句
EXPANSION JOINTExpansion joint
Expansion joint
Expansion joint and method of assembling same
Failure of 304 stainless bellows expansion joint
Dynamic Anomalies in a Modular Bridge Expansion Joint
Construction Technology of Elastic Expansion Joint of TS Series Bridge
The capability and application of sealing material for expansion joint
Mechanism of noise generation from a modular expansion joint under vehicle passage
Design, Specification, Installation, and Maintenance of Modular Bridge Expansion Joint Systems
Experimental investigation of bituminous plug expansion joint materials containing high content of crumb rubber powder and granules
Evaluation of Temperature Data of Confederation Bridge: Thermal Loading and Movement at Expansion Joint
Numerical investigation of noise generation and radiation from an existing modular expansion joint between prestressed concrete brid...
1. This paper introduces the experience of installation for metal bellows - expansion joint, which is very useful for practical construction.
介绍安装金属波纹管膨胀节的实际施工经验，它有较大的实用意义。
youdao
2. The connection between separator, furnace and back-end flue adopts stainless steel nonmetal expansion joint which can bear high temperature.
分离器与炉膛及尾部烟道之间的联接采用耐高温非金属膨胀节。
youdao
3. Composition cork - Expansion joint fillers - Specifications, packaging and marking.
复合软木。膨胀连接填充料。规范、包装和标记。
youdao
4. So analysis the influencing factors and calculating measure of bridge expansion joint, makes for developing the new product and reasonable selecting of expansion joint.
因此从多方面分析影响伸缩量的因素和计算方法，有助于研制新产品和选择合理的伸缩装置。
youdao
5. But how to estimate and maintain the bridge expansion joint is an urgently problem to be solved by the manage department of the highway.
桥梁伸缩装置的破损程度如何评价，如何养护维修，是公路管理养护部门急需解决的问题。
youdao
6. Expansion joints due to large aluminum alloy temperature deformation, to make the curtain wall has enough deformation servo, curtain wall pillar setting expansion joint.
伸缩缝由于铝合金温度变形较大，为使幕墙有足够的变形随动性，幕墙立柱需设置伸缩缝。
youdao
7. Expansion joint: to meet the deformation of foundation, expansion and construction requirements play, prevent play a change in temperature in transverse crack produces.
伸缩缝：为适应地基变形，管身伸缩及施工要求，防止管身在温度变化时产生横向裂缝。
youdao
8. Using the concept of fatigue test to design a modular expansion joint.
采用疲劳试验概念设计模数化伸缩缝。
youdao
9. Bellows are the basic units of an expansion joint.
波纹管是组成膨胀节的基本元件。
youdao
10. Several standards for the design of expansion joint were compared in terms of application scope, stress evaluation, buckling check and fatigue life calculation.
对几种常用膨胀节设计标准在适用范围、应力评定、失稳校核和疲劳寿命计算等方面进行了对比分析。
youdao
11. Internal expansion joint shall be adopted to single tube side float head heat exchanger for avoiding from large temperature difference stress, when design pressure on shell side is larger.
设计单管程浮头式换热器时，为避免较大的温差应力，在壳程设计压力较大的状况下，常采用内置膨胀节的形式。
youdao
12. Through the practice of developing the products, some experience is available which can be used to determine in which case the expansion joint is necessary in plate-shell exchangers.
当壳体与板束温差较大时，笔者通过对产品开发的生产实践，提出解决板壳式换热器要否设置膨胀节的类似判定方法。
youdao
13. By using visual examination, scanning electronic microscope, X-ray energy spectrum and metallurgy and chemical analysis, the cause of crack occurred in bellow expansion joint was analyzed.
采用宏观检查、扫描电镜、X射线能谱、金相分析及化学分析等方法，对金属波纹膨胀节开裂的原因进行了分析。
youdao
14. The results show that the early failure of the corrugation expansion joint was results from the stress corrosion cracking in the components.
结果表明，波纹膨胀节发生早期失效是由于构件发生应力腐蚀开裂所致。
youdao
15. In this paper, some corrosion failures of austenitic steel expansion joint in FCC unit are discussed, the factors affecting corrosion analysed and some prevention measures proposed.
本文列举奥氏体不锈钢膨胀节在催化裂化装置使用中发生腐蚀破坏事例，分析腐蚀破坏的各种因素，提出预防的一些措施。
youdao
16. Finally, brings forward protective measures for expansion joint breakage and leakage caused by corrosion, which impacts the unit on safe and stable operation.
对出现的影响装置安稳运行的膨胀节破损及腐蚀泄漏问题，提出了技术防护措施。
youdao
17. Reason of invalidation failure was analyzed on expansion joint of second stage exchanger of mixture hydrogen in semi-regenerative reformer.
分析了半再生重整装置二段混氢换热器膨胀节失效破裂的原因。
youdao
18. The failure phenomenon, reasons and actual examples of corrugated expansion joint are introduced in this paper. And the failure reasons are analyzed.
介绍了波纹膨胀节失效的现象、原因及实例，并对失效的原因进行了分析。
youdao
19. This article gives detail expatiation on pattern selection and performance of corrugated expansion joint used on flue gas energy recovery system.
对烟气能量回收系统波纹管膨胀节的选型及特性作了较全面的阐述。
youdao
20. The roadway expansion joints are of molded rubber segmental expansion joint system or Steel Finger type expansion joint system detailed on the Drawings.
路面膨胀缝为模塑橡胶分节膨胀缝系统或钢指型膨胀缝系统，详见图纸。
youdao
21. Expansion joint is adopted at the lower extreme of recycling machine, water cooled panel, platen superheater and the place piercing through roof.
返料器下端及水冷屏、屏式过热器穿过炉顶处均采用膨胀节。
youdao
22. And further research work should be conducted in the future. This paper is the continuation of "the discussion on the design of the lugs and end rings of metal bellows expansion joint".
本文是《金属波纹管膨胀节端板设计问题讨论》和《金属波纹管膨胀节端板设计问题探讨》的继续。
youdao
23. Now in the design and construction technical specification, there is no specific regulation on setting expansion joint on road surface bases, research in the aspect also is generally neglected.
在沥青砼路面水稳基层中设置伸缩缝，目前在设计、施工技术规范中尚没有明确的规定，对这方面的研究亦通常被人们所忽视。
youdao
24. The design of structural parts of metal bellows expansion joint was discussed. Some Suggestions in this paper were not experimented and were only for reference, or to attract discussion and regard.
针对某几种膨胀节的构件设计问题提出一种设计方法，有些方法尚未经过实验验证只供参考，或引起讨论和重视。
youdao
25. Setting bridge expansion joint will not only influence the comfort of riding, but also cause damage to bridge in different degrees.
桥梁伸缩缝的设置不但影响行车的舒适性，而且容易造成桥梁不同程度的破坏。
youdao
26. Then controlling measures such as improving thermal insulating course, strengthening the masonry rigidity of the parapet, setting the expansion joint on the roof sheathing, etc.
指出改进屋面保温隔热层、加强女儿墙砌体刚度、屋面板设置伸缩缝等是控制裂缝产生的有效措施。
youdao
27. The results show that the stress corrosion is the main failure causing of the bellows expansion joint, while the local pit corrosion, residual stress and the working stress is the necessary condition.
结果表明，应力腐蚀是该膨胀节失效的主要原因，而局部的点蚀和残余应力、工作应力是应力腐蚀的必要条件。
youdao
28. Analysis the basic factor of influencing quantity of expansion joint, including the seismic load and wind load, the calculating formula and measure of expansion amount.
分析桥梁伸缩装置伸缩量的基本影响因素，包括地震荷载和风荷载，国内外伸缩装置伸缩量的计算公式和方法。
youdao
29. This new bridge expansion was proved that it maintains convenient, drives comfortable. and has good economic benefit. contrasting to rubber expansion joint and shaped steel joint.
通过和板式橡胶伸缩缝、型钢缝的对比，证明该新型桥梁伸缩缝具有维修方便、行车平稳舒适、经济效益好等优点。
youdao
30. This paper discusses the design method of adopting UEA compensation contraction concrete, without installing expansion joint in the entire cast-in-place framework of a college canteen.
本文论述了某高校食堂全现浇框架结构未设置伸缩缝，而采用UEA补偿收缩混凝土的设计方法。
youdao
expansion joint
